Comments on: Raspberry Pi Zero USB/Ethernet Gadget Tutorial http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/ Raspberry Pi, Arduino, and DIY Electronics Projects and Tutorials Fri, 20 Apr 2018 22:07:56 +0000 hourly 1 By: nabajyoti http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-23468 Tue, 03 Apr 2018 05:53:17 +0000 http://www.circuitbasics.com/?p=421535#comment-23468 I can not find remote ndis compatible device driver on my windows 10 PC

]]>
By: sbobet http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-23420 Mon, 02 Apr 2018 08:09:57 +0000 http://www.circuitbasics.com/?p=421535#comment-23420 Very shortly this web page will be famous among all blog users, due to it’s pleasant content

]]>
By: debarghya http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-22832 Fri, 23 Mar 2018 14:15:40 +0000 http://www.circuitbasics.com/?p=421535#comment-22832 did not start the device setup

]]>
By: Makerdemy_User http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-22182 Tue, 13 Mar 2018 10:47:50 +0000 http://www.circuitbasics.com/?p=421535#comment-22182 Learn to build your own Smart Helmet using Raspberry Pi Zero for free on Udemy. Only a limited number of coupons are available for this offer. Enroll Now!

https://www.udemy.com/smart-emergency-alert-system-helmet/?couponCode=COUPON_U

]]>
By: milton http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-20727 Wed, 21 Feb 2018 20:02:47 +0000 http://www.circuitbasics.com/?p=421535#comment-20727 As mentioned by SnakeMAR,you have to enable ssh by putting a file named ssh into /boot/ (easy access from any computer)

]]>
By: Santhamoorthy http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-18643 Tue, 30 Jan 2018 07:28:01 +0000 http://www.circuitbasics.com/?p=421535#comment-18643 Superbasics

]]>
By: stefan http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-17328 Mon, 08 Jan 2018 21:43:23 +0000 http://www.circuitbasics.com/?p=421535#comment-17328 I was struggling at the same point as many of you that are using Windows 10.
The main key for me was the following procedure:

1. Download and install “Bonjour Print Services for Windows” from the Apple Homepage
2. A RNDIS Driver can be downloaded here:
http://domotique.caron.ws/wp-content/uploads/telechargement/RPI%20Driver%20OTG.zip
3. Open Putty, SSH:
Host: raspberrypi.local
Port: 22
4. A window pops up an a login is required, password is “raspberry”
–> GREAT, IT WORKS!!!

]]>
By: Sander http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-9839 Wed, 11 Oct 2017 20:25:27 +0000 http://www.circuitbasics.com/?p=421535#comment-9839 I can’t get it to work. I have windows 10 but i don’t have the rsdin drivers. I don’t get the option under other devices in the devicemanager. I do have a serial USB device on com6 but when i try to update drivers for this i can’t find a rsdin driver option. What to do?

]]>
By: Perry http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-3897 Mon, 26 Jun 2017 13:34:39 +0000 http://www.circuitbasics.com/?p=421535#comment-3897 Which version of Windows are you talking of?

In Windows 7, for instance, there is a split: “Microsoft” and “Microsoft Corporation”.
The RNDIS drivers you are searching for can be found under “Microsoft Corporation”.

]]>
By: Perry http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-3896 Mon, 26 Jun 2017 13:31:20 +0000 http://www.circuitbasics.com/?p=421535#comment-3896 There is a new sort of USB adapter available for the Pi Zero:
http://www.zerostem.io

A good startup manual for Windows hosts is missing on the manufacturers web site and that’s why I found your site after doing a lot of search.
Great tutorial, thank you very much!

]]>
By: Frederic http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-3325 Mon, 22 May 2017 04:15:30 +0000 http://www.circuitbasics.com/?p=421535#comment-3325 http://domotique.caron.ws/wp-content/uploads/telechargement/RPI%20Driver%20OTG.zip
It works for me

]]>
By: jwhvfbxjkzkssv http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-3237 Wed, 17 May 2017 00:18:18 +0000 http://www.circuitbasics.com/?p=421535#comment-3237 How you do that, i have this same error. I can ping PiZero but I can’t connect to ssh after enable this in menu.

]]>
By: K.K http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2911 Thu, 04 May 2017 07:11:41 +0000 http://www.circuitbasics.com/?p=421535#comment-2911 Hello

I want to do section “install RANDIS driver” , but there is no Remote NDIS Compatible Device in Microsoft.
So, please tell me how to find Remote NDIS Compatible Device .

]]>
By: Dave http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2694 Mon, 24 Apr 2017 08:53:21 +0000 http://www.circuitbasics.com/?p=421535#comment-2694 Turns out that I didn’t have Bonjour installed on the other device. Works like a charm!

]]>
By: Dave http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2692 Mon, 24 Apr 2017 08:50:34 +0000 http://www.circuitbasics.com/?p=421535#comment-2692 A bit weird because this tutorial works great on my main PC but doesn’t seem to work on my new laptop. Has anyone had issues doing this on different devices?

]]>
By: lee smith http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2155 Sun, 26 Feb 2017 04:52:51 +0000 http://www.circuitbasics.com/?p=421535#comment-2155 Very nice tutorial. I like the pace for someone who is new to pizero. You mention using Bonjour, but do not explain further. I downloaded iTunes and Bonjour printer. How do I set this up to use USB OTG? Thanks advance. Lee

]]>
By: Quentin http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2147 Wed, 22 Feb 2017 22:19:30 +0000 http://www.circuitbasics.com/?p=421535#comment-2147 Ok Fixed after 3 reboots

]]>
By: Quentin http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2146 Wed, 22 Feb 2017 21:59:44 +0000 http://www.circuitbasics.com/?p=421535#comment-2146 Hello,

Thank you for your post. I did everything even the part ” INSTALL THE RNDIS DRIVERS ” but when I try to connect with putty I have this message : Connection refused.

Do you know why ?

Thank you

]]>
By: Geka http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2127 Thu, 16 Feb 2017 17:39:46 +0000 http://www.circuitbasics.com/?p=421535#comment-2127 Hey,

Just an update if you are still looking for driver I was able to get some help from here: https://www.raspberrypi.org/blog/programming-pi-zero-usb/

If you install BonjourPSSetup on Windows it will find the device as “Other devices” and you can find “Remote NDIS Compatible Device” driver under “Microsoft corporation” manufacture.

]]>
By: Sandro Tsagareli http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2110 Tue, 07 Feb 2017 15:55:19 +0000 http://www.circuitbasics.com/?p=421535#comment-2110 i did everything and it worked. i’m ssh-ing pi and pi connects to internet via my pc but there is a flaw – when i try to install something on pi via ssh, it restarts my pc. it starts downloading packages and in midway my pc reboots. can someone help me with thiu problem?

]]>
By: Oliver http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2038 Mon, 16 Jan 2017 21:31:59 +0000 http://www.circuitbasics.com/?p=421535#comment-2038 Dude you saved my life with this guide it is so in-detail with the pictures and the explanation of what to do when things go off course. Thank you 100 times!

]]>
By: wincewicz malgorzata http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-2023 Sat, 07 Jan 2017 20:24:28 +0000 http://www.circuitbasics.com/?p=421535#comment-2023 https://t.co/XqxZ60Br7W

]]>
By: Carlisle Herron http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1946 Sun, 11 Dec 2016 03:59:08 +0000 http://www.circuitbasics.com/?p=421535#comment-1946 tutorial – access #Raspberry_Pi #PiZero over USB giving it both power and internet access. Slick! https://t.co/wDxznv2eIF

]]>
By: SnakeMAR http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1930 Thu, 01 Dec 2016 12:53:38 +0000 http://www.circuitbasics.com/?p=421535#comment-1930 New update from the Raspberry Pi foundation; now, you have to enable ssh by putting a file named ssh into /boot/ (easy access from any computer)

]]>
By: mifux http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1881 Mon, 14 Nov 2016 07:32:02 +0000 http://www.circuitbasics.com/?p=421535#comment-1881 I quote:

“Now open the cmdline.txt file with Notepad. Make sure “Word Wrap” is off to view the file as a single line. You don’t want to add any line breaks to this file. All of the commands need to be in a single line. If you use Wordpad to edit this file, you may create unintentional line breaks, so using Notepad is best. Scroll across the line and find the command rootwait. After the rootwait command, add modules-load=dwc2,g_ether”

The crucial is to put “modules-load=dwc2,g_ether” right after rootwait command, and no “wordwrap” or line break i editing file (cmdline.txt). Check also is there space between commands.

]]>
By: furriephillips http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1864 Sat, 05 Nov 2016 13:09:02 +0000 http://www.circuitbasics.com/?p=421535#comment-1864 Unless you are using particular options like -i (setting an interval lover than a set threshold): –

% ping -i.1 10.6.8.10
PING 10.6.8.10 (10.6.8.10) 56(84) bytes of data.
ping: cannot flood; minimal interval allowed for user is 200ms

% sudo ping -i.1 10.6.8.10
PING 10.6.8.10 (10.6.8.10) 56(84) bytes of data.
64 bytes from 10.6.8.10: icmp_seq=1 ttl=64 time=0.165 ms
64 bytes from 10.6.8.10: icmp_seq=2 ttl=64 time=0.133 ms
64 bytes from 10.6.8.10: icmp_seq=3 ttl=64 time=0.168 ms
64 bytes from 10.6.8.10: icmp_seq=4 ttl=64 time=0.134 ms
^C
— 10.6.8.10 ping statistics —
4 packets transmitted, 4 received, 0% packet loss, time 300ms
rtt min/avg/max/mdev = 0.133/0.150/0.168/0.016 ms

]]>
By: Tony http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1863 Sat, 05 Nov 2016 11:30:08 +0000 http://www.circuitbasics.com/?p=421535#comment-1863 Great guide, I’m really looking forward to getting this working. However, I get a boot error when I add the modules to cmdline.txt
systemd-modules-load.service: main process exited, code:exited, status=1/Failure
[FAILED] Failed to start Load Kernel Modules.

I have Raspbian Jessie, installed via NOOBS on a Raspberry PiZero. I hooked up a monitor, keyboard and mouse and made the changes advised above then rebooted.

Any advice would be very appreciated

]]>
By: matt http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1840 Wed, 02 Nov 2016 16:49:53 +0000 http://www.circuitbasics.com/?p=421535#comment-1840 I have the same problem, but the part with “Install the RNDIS Drivers” does not work because you don’t have the option to select network drivers (as it is a COM device, only allowing different COM drivers) – Windows 10 x64

]]>
By: Russia Skill (iRussiaSkill) http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1810 Tue, 25 Oct 2016 09:24:06 +0000 http://www.circuitbasics.com/?p=421535#comment-1810 I need a link for download windows 10 driver

]]>
By: bharat bhardwaj http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1747 Sat, 08 Oct 2016 23:26:51 +0000 http://www.circuitbasics.com/?p=421535#comment-1747 Trying to hook up pi zero to win 10 I can not see any ethernet port in device manager not showing in usb either. I sure am goofing some where IU am a new bee so excuse me. Need help

Thanks
Bob

]]>
By: Fred http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1701 Wed, 28 Sep 2016 17:09:59 +0000 http://www.circuitbasics.com/?p=421535#comment-1701 I have tried a hub connected to the PiZero with the PC connected to it without success.
Is this possible? If yes, then I would be able to connect a second USB device to the PiZero.

Thanks and best regards!

]]>
By: Fred http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1695 Tue, 27 Sep 2016 21:01:16 +0000 http://www.circuitbasics.com/?p=421535#comment-1695 This works with Jessie Lite as well. I had to spend more time with Windows which I presume was because I am using Win7.

]]>
By: bu http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1682 Mon, 26 Sep 2016 01:03:26 +0000 http://www.circuitbasics.com/?p=421535#comment-1682 Trolls need not reply. The only answer wanted is a ” ‘Here is how you do it, and it works this way the way you that asked for it. Here are the steps’ …” reply. Questions, misderections and “stop using your product” replies are useless.

]]>
By: whheydt http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1677 Sat, 24 Sep 2016 18:58:29 +0000 http://www.circuitbasics.com/?p=421535#comment-1677 Minor note…

Using ping does NOT require sudo.

]]>
By: whheydt http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1676 Sat, 24 Sep 2016 18:56:43 +0000 http://www.circuitbasics.com/?p=421535#comment-1676 When pinging Google (or any other site), leave off the “http://”.

]]>
By: Jarle http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1673 Sat, 24 Sep 2016 08:59:11 +0000 http://www.circuitbasics.com/?p=421535#comment-1673 Hi Andrew – Just had an email notification on this post I’m a bit confused as to who the question is directed to ??

]]>
By: Andrew Mulholland http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1671 Fri, 23 Sep 2016 21:05:37 +0000 http://www.circuitbasics.com/?p=421535#comment-1671 Do you have any intention of referencing where the initial work/research for this post came from?
https://t.co/gHWk23hi7i

]]>
By: Tomsz http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1669 Fri, 23 Sep 2016 01:33:47 +0000 http://www.circuitbasics.com/?p=421535#comment-1669 I would try doing the “Install the RNDIS Drivers” again. Without this driver, the USB port will show up as a COM port.

]]>
By: Kamiel http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1529 Tue, 09 Aug 2016 15:44:38 +0000 http://www.circuitbasics.com/?p=421535#comment-1529 Thanks for the wonderful tutorial.
Unfortunately, my RPi keeps showing up as a COM-port serial device, rather than an ethernet one 🙁
Any idea how to fix that?

]]>
By: filippoclaudi24 http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1526 Mon, 08 Aug 2016 14:54:29 +0000 http://www.circuitbasics.com/?p=421535#comment-1526 Can you do this without reinstalling? Can you both boot normally and attach to usb?

]]>
By: Larry W8LM http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1517 Sat, 06 Aug 2016 15:09:48 +0000 http://www.circuitbasics.com/?p=421535#comment-1517 I repeatedly have tried this. Fine it works first time. However I cannot ping internet addresses. I can SSH into it. I try to share network on my Windoze 10 machine -W10 is showing part of HOME network and I do have a home group set up. The ZERO network connection says NO INTERNET connection and that it is PUBLIC. I can’t change it. Not only that. If I take down the Windows 10 a HP 8000 desktop, upon rebooting I get a BSOD and a “WDF-VIOLATION then a reboot loop back to the BSOD in a loop I remove the PI ZERO and it boots just fine. Plug in the the ZERO and BSOD— unless I re-image my micro SD card. I have tried 2 micro SD cards.. This machine is my only Windows 10 machine. microSD is class 10 16Gb. I have a class 4 8Gb card coming. I have 2 Windoze 7 machines which I can’t blow up and a Windows home server 2011 machine. The remainder only test bed machine I have I rolled on Windows 10 last month so I can blow up all I want. If I repeat all the above, It works 1st time not internet. bot the W10 and back to BSOD loop..My W10 drivers are all current, all updates current. Does this work on W10 machines?? Any help??? PS- I am A+, server+, Network+ certified. 3 months total experience with Windoze 10. I have a RPI B+ a 3 in the box. Wanted to try the ZERO it is V1.3.

]]>
By: AndrewR http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1498 Mon, 01 Aug 2016 19:08:04 +0000 http://www.circuitbasics.com/?p=421535#comment-1498 Also try to disconnect and reconnect the wifi.

]]>
By: AndrewR http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1497 Mon, 01 Aug 2016 18:56:42 +0000 http://www.circuitbasics.com/?p=421535#comment-1497 Try to unchecked shared connection >ok then check shared connection> ok. Then wait 1-2min and try to ping.

]]>
By: Derek A Willingham http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1471 Sun, 31 Jul 2016 20:55:14 +0000 http://www.circuitbasics.com/?p=421535#comment-1471 I have a issue where the pi will not connect to the shared network. My main pc is connected to a secure Wireless access point and the pi can ping 8.8.8.8 but not http://www.google.com

I have made sure the pi is set to dhcp lookup and the usb0 connection is in the interfaces file.

Any ideas that I could try? Much thanks.

]]>
By: timgkavanaugh http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1470 Sun, 31 Jul 2016 20:43:36 +0000 http://www.circuitbasics.com/?p=421535#comment-1470 Everything works great thus far. The only problem is I would like to be able to SSH to the PiZero from another computer within the network. Would this be possible?

]]>
By: AndrewR http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1469 Sun, 31 Jul 2016 19:44:42 +0000 http://www.circuitbasics.com/?p=421535#comment-1469 Do it by trying and retrying. I was using a Jessie Lite and now I’ve installed a Full Jessie and it is working. Thank you.

]]>
By: AndrewR http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1468 Sun, 31 Jul 2016 12:54:47 +0000 http://www.circuitbasics.com/?p=421535#comment-1468 I still get: connect: Network is unreachable and ping: unknown host http://www.google.com. The Ethernet (RPI) is set to get the ip automatic. Please help.

]]>
By: mooki http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1461 Thu, 28 Jul 2016 20:25:18 +0000 http://www.circuitbasics.com/?p=421535#comment-1461 might be useful to say (at least to a noob like me) that in order for the rdp to work, one must enable a desktop on the pi zero 😐
while ‘sudo raspi-config’ to expand filesystem, also go to boot settings and select the desktop setting.

]]>
By: jarjargeek http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1453 Tue, 26 Jul 2016 13:57:25 +0000 http://www.circuitbasics.com/?p=421535#comment-1453 Here’s the original blog on it – Linux / Mac requires a Lot LESS tinkering , last time I tried literally Plug’nPlay after modding config. & cmdline. files

http://blog.gbaman.info/?p=699

]]>
By: Geoff http://www.circuitbasics.com/raspberry-pi-zero-ethernet-gadget/#comment-1452 Tue, 26 Jul 2016 11:57:15 +0000 http://www.circuitbasics.com/?p=421535#comment-1452 I agree!

]]>